13-17-621 Page 106
installations, such as high elevation, it may be necessary to turn this function off to avoid trips. Figure 146
shows the
Rotation Direction Check
setting turned
On
.
Figure 146: Rotation Direction Check
4.7.3.3 Min Stop Time:
The
Min Stop Time
is the minimum amount of time that the compressor motor will run after pressing the
stop button, which starts the depressurization process. Figure 147 shows setting the
Minimum Stop Time
as
30 seconds
.
Figure 147: Min Stop Time
4.7.3.4 Minimum Run Time:
The
Minimum Run Time
setting is defines the amount of time that the compressor must be running before
it will be allowed to stop automatically. This setting should be utilized to limit the number of motor starts per
