![background image](http://html1.mh-extra.com/html/gardner-denver/gd-connect-12/gd-connect-12_manual_3574503042.webp)
9. Webserver module
42
9. Webser ver module
9.1 Function
The Webserver module provides an interface for the
customer, which allows the visualization of the GD
Connect 12 via network.
For this visualization, no special software has to be
installed, but is done with the help of a webbrowser as
e.g. Microsoft Internet Explorer or Mozilla Firefox.
The Weberserver module is available in two versions
which differs only in terms of their power supply:
Version 1: 230V AC / 50-60Hz
Version 2: 110V AC / 50-60Hz
9.2 Technical data
Electrical connection
Voltage:
230V AC +/-10%
110V AC +/-10%
Internal fuses
F1 (Primary):
T0.5A (5x20mm)
F2 (Secondary): T0.5A (5x20mm)
Connection to the GD Connect 12
Interface: RS485
Cable type:
2x2x0,5..1,5mm²
twisted pair and screened
Wiring length:
max. 1200m
Bus termination: 120 Ohm
Switchable by jumper J1 and J2
Connection to the network
Interface: Ethernet
10Base-TX / 100Base-TX
Connection: RJ45
Ambient temperatures
Operation:
0° .. 55°C
Storage:
-40 .. 70°C
EMC conformity
Immission:
DIN EN 61000-6-3
Immunity:
DIN EN 61000-6-2
Dimensions (W x H x D)
180 x 180 x 74 mm
Type of construction / Protection
Plastic housing / IP64
Mounting
Wall mounting
Weight:
1,5 kg / 3.3 lbs
9.3 Scope of delivery
After receipt, check the scope of delivery:
Module in plastic housing
SD card (1GB) within the SD card reader of the
Webserver module
Cable (1m) to connect the Webserver module to
the GD Connect 12
Ethernet cable (3m)
(Cat.5E, Type 100Base-TX)