Slug Out™ Knockout Driver instruction manual
2
Table of Contents
Description................................................... 1
Identification ................................................ 2
Safety Issues ............................................... 2
Drilling Guide Holes ..................................... 3
Punching 1/2" Holes .................................... 3
Punching 3/4"-3" Holes ................................ 3
Punching 3-1/2"-4" Holes ............................ 4
Repair and Service Instructions .................. 4
Parts and Service ........................................ 4
Warranty ...................................................... 4
Warranty Return Procedure ......................... 4
CAPACITY
• Use only cordless minimum 14.4V drill to power mechanical driver
• Mechanical driver is designed for 10 GA steel max.
Damage can occur if used on higher gauge steel.
• When punching holes in 10 GA steel, use low speed setting on drill.
• Hole Capacity: 1/2"–4"
• Also can use impact driver
