conductor with insulation having an outer surface that is
green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the
electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
Check with a qualified electrician or service personnel it
the grounding instructions are not completely
understood, or if in doubt as to whether the tool is
properly grounded.
Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept the
tool’s plug.
Repair or replace damaged or worn cord immediately.
This tool is intended for use on a circuit that has an
outlet that looks like the one illustrated in Figure 8. The
tool has a grounding plug that looks like the plug
illustrated in Figure 9.
9.0 General Bending Instructions
Mounting Bending Shoes
Choose desired shoe size and type (Rigid, IMC, EMT, or 40
Mil PVC Coated Rigid) and slide shoe onto the main drive
sprocket shaft. See Figure 10. Next, align the four drive studs
on the back of the shoe with the four holes in the main drive
sprocket. Push the shoe onto the main drive sprocket shaft.
See Figure 11.
9.1
MOUNTING SUPPORT ROLLERS AND SUPPORT
UNITS
Choose the desired support roller or support unit for
corresponding shoe size and type (Rigid, IMC, EMT, or 40 mil
PVC coated Rigid.) The appropriate size and type of support
MUST be used with the corresponding shoe size and type.
Mount the support roller or support unit on the right leg of the
bender as you face the unit. Secure the support roller or
support unit with the quick release hinge pin. See Figure 12.
GREENLEE
®
- Bending shoes and attachment from
GREENLEE
®
555 R, E, I (Rigid, EMT, IMC) and 40 mil PVC
coated Rigid Benders with serial number PL and AAJ will fit
the B2555 Sidewinder
®
Bender. All B2555 Sidewinder
®
Bending shoes and attachments will fit GREENLEE 555 R, E,
I Benders with PL and AAJ serial numbers.
ENSLEY - No modifications are needed to mount the B2555
Sidewinder
®
Rigid shoes to the ENSLEY E-969.
Current Tools
®
- Bending shoe and attachments from Current
Figure 8. 3-Prong Outlet (20 A)
Sprocket Shaft
Main Drive
Sprocket
Drive Studs
Bending Shoe
Mounting Holes
Main Drive Sprocket
Figure 11. Mounting Bending Side View
5
Figure 10. Mounting Bending Front View
Figure 12. Mounting Support
Figure 9. 3-Prong Plug (Nema 5-20)
