Page
4
GARDTEC
800 Series
User Manual
User Code Types
Ten types of User Codes are available on the Gardtec
840,
and each type allows for
different levels of access. In total 47 User codes may be programmed by a Master
Level User Code to any of the ten types.
User number 1 will always be a Master Level User but the remaining 46 User Codes
may be programmed to the required level of access.
The Code Levels should be viewed as two groups, global codes that give system
control and area codes that give area control.
The User Code levels available and the functions available for the levels are:-
Global Code Levels
0 = Set Only
Only Allows for the setting of the system.
1 = Main
Allows Setting, Part Setting, Area Setting, Zone Remove,
System Test, Unsetting.
3 = Master
Allows Setting, Part Setting, Area Setting, Zone Remove,
System Test, Viewing the Log, Chime On/Off, Program
User Codes, Set Time/Date, Unsetting.
Area Code Levels
2 = Area 1
Allows Area 1 Setting, Area 1 Part Setting, Area 1
Unsetting.
4 = Cleaner
Full System Setting (from unset system),
Cleaner Area Unsetting (from set system),
Cleaner Part Set (from part cleaner set system).
5 = Area 2
Allows Area 2 Setting, Area 2 Part Setting, Area 2
Unsetting.
6 = Area 3
Allows Area 3 Setting, Area 3 Part Setting, Area 3
Unsetting.
7 = Main 1
Allows Area 1 Setting, Area 1 Part Setting, Area 1 Zone
Remove, Area 1 Test, Area 1 Unsetting.
8 = Main 2
Allows Area 2 Setting, Area 2 Part Setting, Area 2 Zone
Remove, Area 2 Test, Area 2 Unsetting.
9 = Main 3
Allows Area 3 Setting, Area 3 Part Setting, Area 3 Zone
Remove, Area 3 Test, Area 3 Unsetting.
combi.qxd 12/01/99 09:00 Page 4
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com