Page
21
User Manual
GARDTEC
800 Series
Using LED Keypads
This section is dedicated to using LED keypads (Twin Seven Segment).
Setting The System
1)
With the display showing ' Un '
2)
Enter the User Code (followed by YES if Master or Main type code has been
used).
3)
The display will show 'E=' and the exit tone will sound. Exit the premises via
the authorised exit route (the exit tone will change if any detectors are
violated during exit).
4)
Once the premises are secure listen that the exit tone returns to the
continuous tone.
5)
Wait until the exit tone finishes before leaving.
Note:
Setting the system with an area code will set only the area associated
with that code.
Note:
Setting an unset system with a cleaner code will set the full system.
Unsetting The System
1)
Enter the premises via the authorised entry route (the broken entry tone will
sound).
2)
Proceed to the keypad, enter a valid user code, the display will show' Un '.
3)
The system is now Unset.
Note:
If an area code has been entered only the area associated with that code
will be Unset.
Note:
If a cleaner code has been entered only the cleaner area will be Unset.
combi.qxd 12/01/99 09:00 Page 21
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com