6
AFTER SALES SUPPORT
1800 599 8898
MODEL: 22010-17 PRODUCT CODE: 1537 05/2017
AFTER SALES SUPPORT
7
1800 599 8898
MODEL: 22010-17 PRODUCT CODE: 1537 05/2017
USA
USA
USA
USA
Assembly Instructions
Assembly Instructions
Always read and follow the instructions before use. Be cautious to
avoiding pinching your hands or fingers in any of the moving parts as
frame opens and closes.
The gazebo is designed to provide shade only. Do not use this gazebo
in strong wind and rain. Wind and rain can damage the gazebo and
could result in injury to you and others. This is not intended to be used
as a permanent structure.
This gazebo is for sun shade only, not water proof and not intended to
use in the rain. The water can collect fabric and severely damage the
gazebo. It is advised to take down the gazebo before it rains!
Important: Do not use excessive force during any part of set up.
NOTE: Canopy top and frame are shipped unattached to avoid damage.
A first time set up requires that top be attached on to the frame with
velcro. Once canopy top is permanently attached, set up and take
down are easily accomplished within seconds.
Before starting assembly, find a flat level work area. The assembled
gazebo is 10’ x 10’. Allow sufficient working room for the assembly.
Important: Use caution when opening or closing the gazebo to avoid
damaging the frame.
Gradually pull each corner of the gazebo outward to extend the frame
fully on all sides. Four people are recommended in assembling the
gazebo. Holding a gazebo leg, each person should extend the frame
outward a little or until a small amount of resistance is felt. Do not
pull the frame out too much at any one time as this may cause damage
to the frame. Keep moving outward until the frame is fully extended.
Unfold the fabric canopy pack, place the fabric top over the top frame.
Use the velcro pads to secure each corner of the cover to the corner of
the frame.
