67
3.When using your brush cutter, never take your eyes off. if you need to, place the throttle into the idling position.
4.When using your brush cutter, do not let the unit get closer to your feet nor raise the unit above your waist.
NOTES ON TRANSPORTATION
(a). Make sure the appropriate blade cover is in place.(if blade is equipped)
OPERATION SAFETY PRECAUTIONS
(a).Grip the handles of the brush cutter firmly with both hands. If you suspend the work, place the throttle into the idling
position.
(b).Always be sure to maintain a steady,even posture while working.
(c). Maintain the speed of the engine at the level required to perform cutting work., and never raise the speed of the
engine above the level necessary.
d. Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an
electrical shock.
e. Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or
immediately after shutting down the engine. Doing so may result in serious burns.
f. .when you finish cutting in one location and wish to continue work in another spot, turn off the engine and turn the unit
as the cutting parts faces away from your body.
MAINTENANCE SAFETY PRECAUTION
a Under no circumstances should you ever take apart the brush cutter or alter it in any way. Doing so mingt result in the
brush cutter becoming damaged during operation or the brush cutter becoming unable to operate properly.
b. . Always be sure to turn off the engine before performing any maintenance or checking procedures.
c When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools
and equipment to prevent injury.
5.SET UP
HANDLE
1.Loosen the 4 bolts on the handle bracket.
2.Insert the right handle(throttle lever is attached)and the left handle assembly
into the braket and retighten the bolts securely.
(1)Handle bracket
(2)Right handle
(3)Bolt
(4)Left
(5)Engine side
SAFETY GUARD
Attach the safety guard to the gear care and fix it with the clump and 2 bolts (M5X25)securely
THROTTLE WIRE
WARNING
After fitting up the handle make sure that the throttle cable is put in the throttle
lever.if not,it is very dangerous because the engine rotate after releasing the
throttle lever.
