GARDEO PRO 5411074197797, Original Instructions Manual

Page: 74 / 90

74
are to be replaced and not repaired. Use genuine spare parts (blades should always
bear the symbol). Parts that are not of the same quality can damage the equipment
and be dangerous for your safety.

If the fuel tank has to be drained, this should be done outdoors and when the engine
is cool.

Wear strong work gloves when removing and reassembling the blade.

Check the blade’s balance after sharpening.

Check the self-closing guard and grass-catcher frequently for wear and deterioration.

Whenever the machine is to be handled, transported or tilted you must:
-
Wear strong working gloves;
-Grasp the machine at the points that offer a safe grip, taking account of the weight
and its distribution.
Blade
Inspection

Tilt the mower to the right, so the air cleaner side is up. This will help to prevent fuel
leakage and hard starting.

Inspect the blade for damage, cracks and excessive rust or corrosion.
A dull blade can be sharpened, but a blade that is excessively worn, bent, cracked, or
otherwise damaged must be replaced.
Check that the blade bolts are tight.
ref LM460S-40231-01 460mm
Removal and installation
Wear heavy gloves to protect your hands.

Remove the bolt with a socket wrench. Use a wooden block to prevent the blade from
turning when removing the bolt. Then remove the blade.

Install the blade using the blade bolt and special washers. Be sure to install the
special washers with the concave side toward the blade and the convex side toward
the bolt.

Tighten the blade bolt with a torque wrench. Use a wooden block to prevent the blade
from turning when tightening the bolt.