To install the gas cylinder, lift the cylinder casing to reveal the gas hose’s regulator. Secure the gas hose to the
gas cylinder’s outlet via the gas hose’s regulator. Screw it anti-clockwise. Then position it inside the bracket
and lower the cylinder casing. See Figure 12.
Checking For Gas Leaks
1. Make 100ml of soapy solution (one part liquid dishwashing detergent and three parts water). This solution
will be used to check for leaks.
2. Apply several drops of solution where the hose attaches to the regulator (see Figure 12).
3. Apply several drops of solution where the regulator connects to the cylinder.
4. Make sure all the patio heater’s valves and switches are set to OFF.
5. Turn the cylinder valve ON.
If any bubbles appear at any of the connection points, this confirms that there is a leak. Table 1 defines the type
of leak and its solution. However, if no bubbles appear at any of the connection points, the connection is secure.
Positioning The Gas Patio Heater
This gas patio heater is only suitable for OUTDOOR USE only. It should never be used indoors.
Please position this gas patio heater on a solid and even surface. It is suitable for decking areas, patios and
terraces. Never place this gas patio heater on grassy or uneven terrain.
Also, please ensure that the heater is placed in well ventilated area where there it atleast 50cm away from
walls. It should be position in safe distance away from the people.
IMPORTANT: Please inspect the provided hose assembly for excessive abrasion, cuts or wear. If so,
DO NOT operate the patio heater and please purchase a replacement hose from the manufacturer.
Figure 12
Type of leak
Solution
Leak at hose/regulator
connection
Tighten connection and perform another leak test. If bubbles continue to appear,
the hose should be returned to the place of purchase.
Leak is at regulator/cylinder
valve connection
Disconnect, reconnect, and perform another leak check. If you continue to see
bubbles after several attempts, the cylinder valve is defective and should be
returned to the cylinder’s place of purchase.
Warning
-
Please Read Before Use
Before using this gas patio heater, please ensure that the surrounding area is clearly away from any
combustible materials and make sure there is no obstruction to the patio heater’s air vents. Also, please
ensure that the gas connections are secure and there are no leaks (see Checking For Gas Leaks). In
addition, please inspect the hose assembly for excessive abrasion, cuts or wear. Do NOT use if the hose
assembly is damaged.
Summary of Contents for GW367
Page 4: ...Product Elements...
