21
SERVICING YOUR TILLER
ENGINE OIL
FILLER CAP
/
DIPSTICK
OIL FILLER NECK
LOWER LIMIT
UPPER LIMIT
Screw in the engine oil filler cap
/
dipstick securely
.
4
.
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining
.
Improper disposal of engine oil can be harmful to the environment
.
If you change your own oil
,
please dispose of the used oil properly
.
Place a suitable container below the engine to catch the used oil
,
and then remove the engine oil filler cap
/
dipstick
,
drain plug
,
and
sealing washer
.
1
.
Allow the used oil to drain completely
,
and then reinstall the drain
plug and sealing washer
.
Tighten the plug securely
.
2
.
22
SERVICING YOUR TILLER
With the tiller in a level position
,
fill with the recommended oil to the
outer edge of the oil filter hole.
Running the engine with a low oil level is misuse and can cause
engine damage
.
Screw in the engine oil filler cap
/
dipstick securely
.
3
.
4
.
ENGINE OIL RECOMMENDATIONS
AMBIENT TEMPERATURE
Oil is a major factor affecting performance and service life
.
Use a 4
-
stroke automotive detergent oil
.
SAE 10W
-
30 is recommended for general use
.
Other viscosities shown
in the chart may be used when the average temperature in your area is
within the recommended range
.
TRANSMISSION OIL RECOMMENDATIONS
TRANSMISSION OIL FILLER CAP
The tiller is shipped WITHOUT TRANSMISSION OIL. Fill in oil before use.
Remove the transmission oil filler cap.
1
.
Screw in the oil filler cap.
3
.
Recommended oil is 80W-90
2
.
Recommended capacity is 500ml
-600ml.
