Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
6. The charging status of the battery (35) can be indicated by pressing the but-
ton (F) and the charging status will be indicated in percent.
NOTE:
The power to the charger should be turned off when unattended, with or
without a battery inserted.
VII. PREPARING FOR OPERATION
Mulch and mowing (Fig. 1 / 11)
Using the mower without the hard catcher (25) attached: the lawn mower will mulch
as it cuts and and the fine grass clippings are distributed back onto the grass sur
-
face without leaving piles of grass clippings.
m
WARNING!
Ensure the engine is NOT operating when undertaking this task.
1. Remove the hard catcher (25) by lifting the rear discharge guard (24) and re-
leasing the hard catcher (25).
2. Lift the rear discharge guard (24), insert the mulching block (36) into position,
then release and close the rear discharge guard (24).
3. Ensure the side ejector cover (19) is in the closed position. Do NOT use the side
discharge chute (19) when mulch and mowing.
Adding and Checking the oil (Fig. 1 / 12)
IMPORTANT:
The engine of this lawn mower is packed with NO OIL in the engine.
Prior to starting the engine, Oil MUST be added to the sump of the engine.
Failure to add sufficient oil will result in damage to the engine which is NOT covered
under the warranty of the lawn mower.
On a new lawn mower, the engine needs to be filled with 600 ml of SAE 10W/30
engine oil.
Each time the lawn mower is used, the oil level should be checked and if low, add
sufficient oil to ensure the oil level is to the full mark on the dipstick (21).
1.
Position the lawn mower on a flat and level surface. Clean the area directly
around the oil filler cap (21).
2.
Remove the oil filler cap / dipstick (21) by turning turn in an anti clockwise direc
-
tion and lift the oil filler cap / dipstick (21) outwards. Clean the dipstick (21) with
a clean cloth, cleaning away any visual oil.
3. FOR A NEW LAWN MOWER, add 600ml of 4 stroke SAE 10W/30 engine oil.
24
AFTER SALES SUPPORT
1300 855 831
MODEL: MS196-52E PRODUCT CODE: 61866 08/2018
AUS
Before starting/Preparing for operation
MS196-52E