S
U
A
1800 909 909
www.powertoolsupport.com email: [email protected] 11/2015
AFTER SALES SUPPORT
43671
11
Getting Started
3
Unpacking
Due to modern mass production techniques, it is unlikely that your petrol hedge
trimmer is faulty or that a part is missing. If you find anything wrong, do not
operate the tool until the parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Contents of carton
1 x 26cc 2 Stroke Hedge Trimmer
1 x Tube Spanner / Screw driver
1 x Mixing Bottle with 40:1 markings
1 x Blade Cover
1 x Instruction Manual
1 x Warranty Card & Details
1 x Quick Start Guide
Assembly
This hedge trimmer does not require any pre-assembly before use, however the
hedge trimmer is required to be filled with 500ml of Unleaded petrol: 2-Stroke oil
(40:1) before operation.
Removing / Replacing the cover
1. To remove the blade cover (22) lift the locking
knob and slide the cover off the blades (1). (Fig. A)
2. To replace the blade cover (22), ensure the locking
knob is lifted and slide the blade cover (22) full
onto the blade (1). (Fig. B)
3. To lock secure the blade cover (22) on the
blades (1), depress the locking knob. (Fig. C)
Fig. A
Fig. B
Fig. C
