Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 6452
15
Intended use
Important!
This hedge trimmer is suitable for cutting
hedges, bushes and shrubs. Any use which is not
expressly permitted in manual may result in damage to
the hedge trimmer and place the user in serious danger.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for
equivalent purposes.
Tips on use
The hedge trimmer can be used not only for trimming
hedges but for trimming shrubs and bushes as well.
For optimum trimming performance, guide the blade
teeth at an angle of approx. 15° to the hedge (see Fig. 7).
Since the blades cut on both sides and run in opposite
directions to each other, you can trim in both directions
(see Fig. 8).
To achieve a hedge with a uniform height it is
recommended that you stretch a piece of string along the
edge of the hedge for guidance. Then simply cut away all
twigs projecting above the line (see Fig. 9).
The sides of the hedge should be trimmed with arc-type
movements from below upwards (see Fig. 10).
Instructions
6
GLHT680 User Guide Artwork.qxd 11/1/08 11:12 am Page 16
