Gardenline GL-CM 36 Li User Manual Download Page 9

AFTER SALES SUPPORT

1300 922 271

MODEL NUMBER: GL-CM 36 Li, 02/14

9

[email protected]

Additional safety instructions

We pay a great deal of attention to the design of 
every battery pack to ensure that we supply you 
with batteries which feature maximum power 
density, durability and safety. The battery cells have 
a wide range of safety devices. Each individual cell 
is initially formatted and its electrical characteristic 
curves are recorded. These data are then used 
exclusively to be able to assemble the best possible 
battery packs.

Despite all the safety precautions, caution must 

always be exercised when handling batteries.
The following points must be obeyed at all 

times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. 

Incorrect handling can cause cell damage.
Important

: Analyses confirm that incorrect use and 

poor care are the main causes of the damage caused 
by high performance batteries.

Information about the battery

1. 

The battery pack supplied with your cordless 
tool is not charged. The battery pack has to be 
charged before you use the tool for the first 
time.

2. 

For optimum battery performance avoid low 
discharge cycles. Charge the battery pack 
frequently.

3. 

Store the battery pack in a cool place, ideally at 
15°C and charged to at least 40%.

4. 

Lithium-ion batteries are subject to a natural 
ageing process. The battery pack must be 
replaced at the latest when its capacity 
falls to just 80% of its capacity when new. 
Weakened cells in an aged battery pack are 
no longer capable of meeting the high power 
requirements and therefore pose a safety risk.

5. 

Do not throw battery packs into an open fire. 
There is a risk of explosion!

6. 

Do not ignite the battery pack or expose it to 
fire.

7. 

Do not exhaustively discharge batteries. 

Exhaustive discharge will damage the battery 
cells. The most common cause of exhaustive 
discharge is lengthy storage or non-use of 
partly discharged batteries. Stop working as 
soon as the performance of the battery falls 
noticeably or the electronic protection system 
triggers. Place the battery pack in storage only 
after it has been fully charged.

8. 

Protect batteries and the tool from 

overloads.

 Overloads will quickly result in 

overheating and cell damage inside the battery 
housing without this overheating actually 
being apparent externally.

9. 

Avoid damage and shocks.

 Replace batteries 

which have been dropped from a height of 
more than one metre or which have been 
exposed to violent shocks without delay, even 
if the housing of the battery pack appears to 
be undamaged. The battery cells inside the 
battery may have suffered serious damage. In 
this respect, please also read the waste disposal 
information.

10.  If the battery pack suffers overloading and 

overheating, the integrated protective cut-
off will switch off the equipment for safety 
reasons. 

Important.

 Do not press the ON/OFF switch 

any more if the protective cut-off has actuated. 
This may damage the battery pack.

11.  Use only original battery packs. The use of other 

batteries may result in injuries, explosion and a 
fire risk.

Information on chargers and the charging 

process

1. 

Please check the data marked on the rating 
plate of the battery charger. Be sure to connect 
the battery charger to a power supply with 
the voltage marked on the rating plate. Never 
connect it to a different mains voltage.

2. 

Protect the battery charger and its cable from 
damage and sharp edges. Have damaged cables 
repaired without delay by a qualified electrician.

3. 

Keep the battery charger, batteries and the 
cordless tool out of children’s reach.

4. 

Do not use damaged battery chargers.

5. 

Do not use the supplied battery charger to 
charge other cordless tools.

6. 

In heavy use the battery pack will become 
warm. Allow the battery pack to cool to room 
temperature before commencing with the 
charging.

7. 

Do not over-charge batteries. 
 

Do not exceed the maximum charging 

times. 

These charging times only apply to 

discharged batteries. Frequent insertion of a 
charged or partly charged battery pack will 
result in over-charging and cell damage. Do not 
leave batteries in the charger for days on end.

8. 

Never use or charge batteries if you suspect that 
the last time they were charged was more than 
12 months previously. There is a high probability 
that the battery pack has already suffered 
dangerous damage (exhaustive discharge).

Summary of Contents for GL-CM 36 Li

















Reviews: