AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: GL-CM 36 Li, 02/14
14
Important. Wear work gloves! Only replace the
blade with a suitable Einhell replacement blade,
as this will ensure top performance and safety
under all conditions.
Carry out the following steps to change the
blade:
1.
Undo the fastening screw (Figure 11/Item F).
2.
Remove the blade and replace with a new one.
3.
When fitting the blade (Figure 11/Item D),
make sure it is installed in the right direction.
The blade’s air vanes must jut into the motor
compartment (see Fig. 11).
4.
Now fit the washer (Figure 11/Item E) onto the
axle and insert the fastening screw.
(Fig.11/Item F)
5.
Then retighten the fastening screw with the
universal wrench. The tightening torque should
be approx. 25 Nm.
8.4 Ordering replacement parts
Please call our customer service centre on 1300 922
271 and provide the following information on all
orders for spare parts:
•
Model/type of the equipment
•
Article number of the equipment
•
ID number of the equipment
•
Spare part number of the required spare part
Storage and Transport
9
Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 0-40°C for the cordless tool and charger and
between 10 and 20°C for the Li-Ion battery. Store the
electric tool in its original packaging.
Disposal and Recycling
10
The equipment is supplied in packaging to prevent
it from being damaged in transit. The raw materials
in this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your local council.
