background image

1800 909 909 

www.powertoolsupport.com      email: [email protected]  11/2015

AFTER SALES SUPPORT 

50714

3

Introduction

Your new Gardenline

®

 Blower Vac will more than satisfy your 

expectations. It has been manufactured under stringent Gardenline

®

 

Quality Standards to meet superior performance criteria.

You will find your new Blower Vac easy and safe to operate, and, with proper care, it will 

give you many years of dependable service.

 CAUTION. 

 Carefully read through this entire instruction manual before using your new 

Gardenline

®

 Blower Vac. Take special care to heed the Cautions and Warnings.

Your Gardenline

®

 Blower Vac has many features that will make your job faster and easier. 

Safety, performance, and dependability have been given top priority in the development 

of this Blower Vac, making it easy to maintain and operate.
Use only Gardenline® replacement parts for your product. Non-conforming parts or 

modifications made to parts will void your warranty.

Intended use of the 26cc Blower Vac

 NOTE. 

 This product is for private domestic DIY use only.

It is not suitable for commercial or trade use.
This Blower Vac has been designed for moving leaves and other small garden debris 

by using either the blowing function to move or disperse, or the vacuum function for 

collection in the bag.

 NOTE. 

 First time users or inexperienced operators pay particular attention to the 

operation of the Blower Vac, including details of starting and stopping and correct use of 

the Blower Vac on pages 16 to 19, as well as the maintenance instructions on pages 20-21.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste.  

All tools, hoses and packaging should be sorted, taken to the local  

recycling centre and disposed of in an environmentally safe way.
Dispose of used motor oil in a manner that is compatible with the environment.
We suggest you take it in a sealed container to your local service station for reclamation. 

Do not throw it in the trash or pour it into the earth.

What your 3 year warranty means

Great care has gone into the manufacture of this product and it should therefore provide 

you with years of good service when used properly.  In the event of product failure within 

its intended use over the course of the first 3 years after the date of 

purchase, we will remedy the problem as quickly as possible once it 

has been brought to our attention. In the unlikely event of such an 

occurrence, or if you require any information about the product please 

contact us via our after sales support services, details of which can be 

found in this manual and on the product itself.
After Sales Support  TEL: 1800 909 909

1

YEAR WARRANTY

Summary of Contents for 50714

























Reviews: