GARDENJACK GBC26C, Original Instructions Manual

Page: 9 / 25

Brush Cutter
GBC26C 8
3.
Place the retaining disc (D) on the tool holder and
turn the hex nut (B) on the thread.
Attention LEFT-HAND THREAD!
4.
To tighten the hex nut (B) use the included
combination wrench and turn the wrench counter
clockwise!
5.
Block the locking disc with
the hex key. In the tool
holder and in the locking
disc you will find openings.
6.
Insert the hex key into the
opening of the tool holder
and turn the tool holder until
the hex key moves into the
whole of the locking disc
and block the locking disc in
this position.
7.
Tighten the hex nut with the included combination wrench only hand tight
and hold the hex key firmly in this position while tightening the hex nut.