GARDENJACK GBC26C, Original Instructions Manual

Page: 12 / 25

Brush Cutter
GBC26C 11
12.
Let the engine run at idle speed for a few seconds to warm up.
13.
Press the throttle lever shortly and the half-throttle lock button will
switch off automatically. The choke will automatically turn to the
initial up-position. The engine returns to idle speed again. The tool holder
with the mounted cutting tool stops after some seconds.
Turning Off the Engine
1.
Release the throttle lever. The engine is now at idle speed.
2.
Place the Start/Stop switch to the position "O" (Stop). ATTENTION: The tool
holder will still rotate for some seconds after turning off the engine. Hold
the machine firmly with the handle until the tool holder stops completely.
Starting the Engine – Warm Start
For starting a warm engine, observe the chapter Starting the Engine – Cold
Start but please note that in this case the choke lever will remain in the
position “OFF”.
Hints for safe Operation
·
When you work with the petrol brush cutter for the first time,
familiarise yourself with the operation and control of the petrol
cutting blade without running engine.
·
Always wear appropriate protection when working with the machine.
·
The design of the petrol brush cutter allows for operation only at the right
side of the user's body.
·
Always hold the machine securely with both hands on the biker
handles.
·
Always keep in mind that the cutting tool keeps rotating for a short while
after the throttle is released.
·
Always ensure a proper idle running of the engine so that the
cutting tool will no longer rotate, when the throttle is pressed.
·
Always use the highest speed for work, this way you will achieve the
best cutting result.