11
10
GB
Applications:
Examples – System extensions – Product Recommendations
➔
Example for application:
Water jets may be integrated into water features.
Model
Cascade
Water
Foaming
Water
Water-
Cascade
Bell
Jet Spray Fleur-de-Lis
fall
Rotating
Art.
7814 *
7816
7818
7820
7822
7823
No.
WP 600
7849
××
××
××
–
–
–
WP 900
7852
××
××
××
–
××
××
WP 1200
7855
××
××
××
××
××
××
WP 1800
7858
××
××
××
××
××
××
WP 2500
7859
××
××
××
××
××
××
* contained in delivery volume
➔
Example for application:
Underwater lighting of water jets and pond edges.
➔
Products:
GARDENA Underwater Light
Art. No. 7951
GARDENA
lightline Transformers
➔
Example for application:
For installation in ponds and fountains.
➔
Product:
GARDENA Light / Fountain Nozzle
Art. No. 7953
Water jets for
26.5 mm (G 3 /4) thread
connections
Adaptable lamps
Light / Fountain Nozzle
GARDENA Fountain Pump
WP 600 / WP 900 / WP 1200 / WP 1800 / WP 2500
Welcome to GARDENA aquamotion ...
Please read these operating instructions carefully and observe
the notes given.
Use the instructions to familiarise yourself with the equipment,
the operating controls, their correct use, and the notes on safety.
A
For safety reasons, children under 16 as well as persons
not familiar with these operating instructions should not use this
pump.
Keep these operating instructions in a safe place.
The Applications Range of Your Pump
GARDENA Fountain Pumps have been designed for private use.
They are not designed for operating watering tools and systems.
The pumps may be used indoors as well as outdoors.
A
GARDENA Fountain Pumps have not been designed for con-
stant use in the industrial sector. Corrosive, easily combustible,
aggressive or explosive substances (e.g. petrol, petroleum, nitro
thinner) as well as salt-water or food / drinking water must not
be pumped.
Intended purpose
Attention
For Your Safety
Operating the Pump
The pump should be operated via a residual
current device with a residual current rating of
≤
30 mA (DIN VDE 0100 -702 and 0100 -738).
The pump must be placed on solid, even
ground. Please ask your electrician for his
advice.
Mains power cables
Mains power cables should not have a smaller
cross-section than a rubber sheathed cable
of the designation H05 RNF. Extension cables
must meet the requirements of DIN VDE 0620.
For Austria
In Austria power cables should correspond to
ÖVE-EM 42, T 2 (2000) /1979 § 22 according
to § 2022.1. According to this standard pumps
used in swimming pools and ponds should
only be operated via an isolating transformer.
Please contact your electrician.
For Switzerland
In Switzerland mobile appliances which are
used outdoors, must be connected via a
residual-current device.
Visual check
Before operating the pump, look to see if there
is any damage of the pump (esp. regarding
power cable and plug). A damaged pump
must not be used. In case of damage, please
have the pump checked by our GARDENA
Service Centre or by an authorised electrician.
Check line voltage
Check line voltage. Data indicated on the type
plate must match technical data of the mains
supply.
Do not operate pump when there are
people in the water
The pump must not be operated when there
are people in the water.
Swimming pools and garden ponds
Swimming pools and garden ponds should
be designed according to international and
national design regulations. Please consult
a professional electrician.
Do not use power cable to carry the pump
Do not use the power cable to carry the
pump or to pull the plug out of the socket.
Protect the power cable from heat, oil and
sharp edges.
Disconnect plug
Please unplug the pump after operation and
before carrying out any maintenance works.
Temperature of the liquid used
The temperature of the liquid used must not
be below 4 °C or above 35 °C.
Wear and reduced output
Sand and other abrasive substances in the
liquid cause in-
creased wear and reduce the output of the
pump.
Observe local noise prevention
regulations
Please observe the local noise prevention
regulations.
GB
