To tilt the motor unit:
0°
15°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
9
4
For cutting at high and low level, the motor unit
4
can be tilted at
an angle of 75° to – 60° in 15° increments.
1. Keep the orange button
9
pressed.
2. Tilt the motor unit
4
in the required direction.
3. Release the orange button
9
and allow the motor unit
4
to
engage.
To extend the telescopic
pipe:
0
3
45 cm
For cutting at high and low heights, the telescopic pipe
3
can be
continuously extended by up to 45 cm.
1. Loosen the orange nut
0
.
2. Extend the telescopic pipe
3
to the required length.
3. Tighten the orange nut
0
again.
4. MAINTENANCE
1
2
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you maintain the unit, make sure that the mains
cable is disconnected and the protective cover
1
is slid
over the blade
2
.
To clean the hedge trimmer:
DANGER! Electric shock!
Risk of injury and risk of damage to property.
v
Do not clean the unit with water or with a water jet
(in particular high-pressure water jet).
1. Clean the unit with a damp cloth.
2. Clean the airflow slots with a soft brush (do not use a screwdriver).
3. Lubricate the blade
2
with a low viscosity oil (e. g. GARDENA
spray-oil Art. 2366). Avoid contact with the plastic parts.
8
GB