2. ASSEMBLY
The hedger, blade, protective cover and the operation instructions
are included in the scope of delivery.
1
2
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you assemble the unit, make sure that the mains
cable is disconnected and the protective cover
1
is slid
over the blade
2
.
To assemble the telescopic
handle:
ß
M
3
5
ß
M
4
3
5
1. Slide the telescopic pipe
3
into the motor unit
4
until you reach
the stop position. Ensure that the two markings
ß
M
face each
other.
2. Tighten the grey nut
5
.
3. OPERATION
1
2
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you connect, adjust or transport the unit,
disconnect the mains cable and slide the protective
cover
1
over the blade
2
.
To connect the hedge
trimmer:
7
8
6
t
r
DANGER! Risk of electric shock!
To avoid damage to the mains cable
6
the extension
cable
7
must be inserted into the cable lock
8
.
v
Before you operate the unit insert the extension cable
7
into the cable lock
8
.
v
Never take hold of the protective cover
1
when connect-
ing the unit.
1. Loop the extension cable
7
, insert the loop into the cable lock
8
and pull tight.
2. Connect the plug
r
of the unit into the socket
t
of the extension
cable.
3. Connect the extension cable
7
into a 230 V mains socket.
6
GB
