6
GB
4. Putting Your Water Timer into Operation
1. Turn battery cover
1
anticlockwise and remove battery
holder
2
.
2. Insert 4 x LR-6-
AA
(
Mignon
) alkaline batteries
3
in the battery
holder.
Ensure that polarity is correct (+ /-).
3. Insert the battery holder
2
in the correct position and close the
battery cover
1
.
Both LEDs are illuminated for 2 seconds and the Water
Timer performs a self-test. The valve is closed automati-
cally during this process.
Make sure you exchange the batteries at the right time to prevent
the Water Timer failing due to low batteries when you are away for
longer periods of time.
Make sure that the time the batteries have been in operation and
the time you are planning to be away does not add up to more
than 1 year.
Even if the batteries are almost empty, the Water Timer ensures
that an open valve is always closed.
If both LEDs flash, the batteries are flat and must be replaced.
Inserting the batteries :
Battery warning :
2
1
3
