14
GB
The filter bag
D
must be used when the system is operated as
a dry suction unit.
1. Pull mains plug of the Dry Suction Unit out of the socket.
2. Remove motor housing (see 4. Assembly).
3. Put the enclosed filter bag
D
on over the end piece of the
suction hose
8
.
4. Refit motor housing (see 4. Assembly).
5. Fit the nozzle required (see 3. Function) on the suction pipe.
6. Plug the mains plug of the dry suction unit into an electric
socket.
7. Set the ON switch
A
to position
(I) ON
.
8. After use, turn the ON switch
A
to the
(0) OFF
position.
A new Filter Bag
Art. 7946-00.900.50
can be ordered from
GARDENA Service.
Operation as a
Dry Suction Unit :
D
8
B
7
C
E
6
4
8
3
6. Storage
Store out of the reach of children.
v
Clean the Pond Silt Remover (see 7. Maintenance) and store
in a frost-free place.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
7. Maintenance
DANGER ! Electric shock !
V
Before any maintenance work, unplug the equipment
from the mains.
1. Remove the suction hose
8
, discharge hose
4
or stopper
plug
B
from the filter tray
3
.
2. Undo the filter tray locks
6
and remove the motor housing
7
.
3. Remove filter cover
E
(bayonet fitting).
4. Remove the foam filter
C
from motor housing
7
.
5. Wash out the filter tray
3
and foam filter
C
with clean water.
Replace the foam filter
C
if necessary.
6. Wash out all hoses and nozzles with clean water.
7. Reassemble the Pond Silt Remover (see 4. Assembly).
The foam filter can be ordered from GARDENA Service.
Storage :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
Pond Silt Remover
cleaning :
