background image

 

 

 

must not be allowed to play with the product. 

Cleaning and user maintenance must not be per-

formed by children without supervision. The use 

of this product by young people under the age  

of 16 is not recommended.

Intended use:
The GARDENA Trimmer is intended to trim and to cut lawn and areas  

of grass in private domestic gardens and allotments.
The product is not intended for continuous operation.
DANGER! Risk of injury! Do not use the product to cut hedges,  

to chop up material or to make compost.

8

EN

EN

Original instructions.

This product may be used under super-

vision, or if instruction regarding the safe 

use of the product has been provided and the 

resulting dangers have been understood, by chil-

dren aged 8 and above, as well as by persons 

with physical, sensory or mental disabilities or  

a lack of experience and knowledge. Children 

IMPORTANT! 

Read the operator’s manual carefully before use and keep for future 

 reference.

Symbols on the product:

 

Read operator’s manual.

 

Keep bystanders away.

  

 

Always wear approved hearing protection. 

Always wear approved eye protection.

  

 

 

Remove the Battery before cleaning or maintenance.

  

 

Do not expose to rain.

  

For the charger: 

Remove plug from the mains immediately if the cable is 

 damaged or cut.

General safety warnings
Electrical safety

  

DANGER! Electric shock!

Risk of injury due to electric shock.

 The product must be supplied through a residual current device (RCD) 

having a rated residual operating current not exceeding 30 mA.

Do not overreach and keep the balance at all times. Always be sure of the footing 

on slopes. Walk, never run.
Do not touch moving hazardous parts before the machine is disconnected from 

the mains and the moving hazardous parts have come to a complete stop.
Always wear substantial footwear and long trousers while operating the machine.

Safe operating practices
1   Training
a)  Read the instructions carefully. Be familiar with the controls and the correct 

use of the machine.

b)  Never allow children or people unfamiliar with these instructions to use the 

machine. Local regulations can restrict the age of the operator.

c)  Keep in mind that the operator or user is responsible for accidents or hazards 

occurring to other people or their property.

2   Preparation
a)  Before use check the supply and extension cord for signs of damage or 

aging. If the cord becomes damaged during use, disconnect the cord from 

the supply immediately.  

DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.  

Do not use the machine if the cord is damaged or worn.

b)  Before use, always visually inspect the machine for damaged, missing or 

 misplaced guards or shields.

c)  Never operate the machine while people, especially children, or pets are 

 nearby.

3   Operation
a)  Keep supply and extension cords away from cutting means.
b)  Wear eye protection and stout shoes at all times while operating the machine.
c)  Avoid using the machine in bad weather conditions especially when there is a 

risk of lightning.

1. SAFETY

Summary of Contents for PowerCut Li-40/30












Reviews: