5. STORAGE
6. TROUBLESHOOTING
Problem
Possible Cause
Remedy
Manual watering is
not possible using the
button
LED next to start delay is blinking red 3x:
battery is very low.
v
Insert a new (alkaline) battery.
Tap is turned off.
v
Turn the tap on.
Controller is not connected.
v
Mount the controller on housing.
Watering program is
not being undertaken
(no watering)
Program entry / modification during or
just before the start pulse.
v
Make program entry / modification
outside the programmed start times.
Valve was opened manually previously.
v
Avoid possible program overlaps.
Tap is turned off.
v
Turn the tap on.
Controller is not connected.
v
Mount the controller on housing.
LED next to start delay is blinking red 3x:
battery is very low.
v
Insert a new (alkaline) battery.
Minimum pressure of 0.5 bar not available.
v
Ensure a pressure of at least 0.5 bar.
LED lights up orange.
v
Pay careful attention to the blue and
grey settings and keep them com-
pletely separate.
Water Control does
not close
Minimum quantity of water drawn is less
than 20 l/h.
v
Connect more drip heads.
Valve soiled.
v
Flush in the opposite direction to the
normal flow direction.
EN
7
