18
GB
Fault Possible
cause
Remedy
The Turbotrimmer
Filament worn or too short.
v
Lengthen the filament –
no longer cuts
see 4. Operation
“Filament
feed (Tip mechanism for
automatic filament feed )”.
Filament cassette empty.
v
Replace the filament cassette
– see 6. Maintenance
“Replacing the filament
cassette” ).
Filament drawn into the
v
Pull the filament out of the
cassette or stuck together.
filament cassette (see above).
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
8. Accessories
GARDENA Replacement
Art. No. 5307
Filament Cassette
GARDENA
for EasyCut 400
Art. No. 5310
Additional wheel
9. Technical Data
Turbotrimmer EasyCut
ComfortCut
PowerCut
(Art. 8846)
(Art. 8847)
(Art. 8848)
Motor power consumption
400 W
450 W
500 W
Mains voltage /
230 V / 50 Hz
230 V / 50 Hz
230 V / 50 Hz
mains frequency
Filament thickness
1.6 mm
1.6 mm
1.6 mm
Cutting width
250 mm
250 mm
270 mm
Filament supply
6 m
6 m
6 m
Filament feed
Tip mechanism
Tip mechanism
Tip mechanism
Weight
approx. approx. approx.
2.4 kg
2.8 kg
3.0 kg
Rpm of filament cassette
approx. approx. approx.
12,700 rpm
12,700 rpm
12,300 rpm
Work area related emission
85 dB (A)
85 dB (A)
85 dB (A)
characteristic value L
pA
1)
Noise level L
WA
2)
measured
95 dB (A) measured
95 dB (A) measured
95 dB (A)
guaranteed 96 dB (A) guaranteed 96 dB (A) guaranteed 96 dB (A)
Hand / arm vibration a
vhw
1)
< 2.5 m / s
2
< 2.5 m / s
2
< 2.5 m / s
2
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
