2. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts
accidentally.
v
Wait for the blade to stop and slide the
pro tective cover over the blade before you
adjust or transport the product.
To charge the battery [ Fig. O1 ]:
CAUTION!
Overvoltage damages the battery and the
charging power supply.
v
Make sure that you use the correct mains voltage.
Before you use the battery the first time, the battery must
be completely charged.
The lithium-ion battery can be charged in any state of
charge and the charging process can be disconnected
at any time without to damage the battery (no memory
effect).
1. Connect the charging power supply
(C)
into a mains
socket.
2. Connect the battery charger cable
(E)
to the charging
socket
;
.
When the battery charging indicator
(L1)
/
(L2)
/
(L3)
flashes
green the battery is being charged.
When the battery charging indicator
(L1)
+
(L2)
+
(L3)
illuminates green, the battery is completely charged
(Charging time see 6. TECHNICAL DATA).
3. Examine the charge status regularly while you charge.
4. When the battery is completely charged, disconnect the
battery charger cable
(E)
from the charging socket
;
.
5. Disconnect the charging power supply
(C)
from the
mains.
Battery charging indicator [ Fig. O2 ]:
Battery charging indicator during charging:
100 % charged
(L1)
,
(L2)
and
(L3)
illuminate (for 60 sec.)
66 – 99 % charged
(L1)
and
(L2)
illuminate,
(L3)
flashing
33 – 65 % charged
(L1)
illuminates,
(L2)
flashes
0 – 32 % charged
(L1)
flashes
Battery charging indicator during operation
(for 5 sec.):
66 – 99 % charged
(L1)
,
(L2)
and
(L3)
illuminate
33 – 65 % charged
(L1)
and
(L2)
illuminate
11 – 32 % charged
(L1)
illuminates
0 – 10 % charged
(L1)
flashes
To adjust the handle [ Fig. O3]:
The handle can be adjusted in 5 steps to suit individual
requirements.
13
EN
