4. Operation
WARNING!
Risk of Injury!
There is a risk of injury if the switching devices installed
on the Shears are removed or bridged (e. g. by fastening the
on switch to the handle). This prevents the Accu Shears
switching off automatically.
v
Never remove or bridge the switching devices.
Cut shrubs:
5
3
4
6
The starting lockout
5
prevents your GARDENA Accu Shears from
being switched on unintentionally.
1. Remove the blade guard
3
from the cutting blade
4
.
2. Disengage the starting lockout
5
by pushing it forwards and
press the ON button
6
. Release the starting lockout
5
again.
Telescopic Swivel Handle
Art. 8899 (optional):
45°
90°
– 45°
– 90°
– 135°
135°
180°
0°
7
8
9
ß
5a
ß
6a
The GARDENA Telescopic Swivel Handle
Art. No. 8899 for the
Accu Shears can be mounted in 45° steps. The swivel handle is
fully height adjustable (85 – 120 cm) and can be adapted to suit
your height.
v
Slide blade protection
3
onto shear blade.
Fitting the Telescopic Swivel Handle:
v
Guide the swivel handle
7
at the desired angle into the handle
holder of the Accu Shears until the lock engages.
Removing the Telescopic Swivel Handle:
v
Press the release button
8
and pull out the swivel handle
7
.
Cutting with the Telescopic Swivel Handle:
1. Attach the Telescopic Swivel Handle
7
.
2. Loosen the adjusting bolt
9
.
3. Set the handle to the correct length and tighten the adjusting
bolt
9
.
4. Disengage the starting lockout
ß
5a
by pushing it forwards and
press the ON button
ß
6a
.
5. Release the starting lockout
ß
5a
again.
5. Putting into Storage
Storage / Overwintering:
Store your Accu Shears out of the reach of children.
1. Charge battery. This increases the life of the battery.
2. Clean Accu Shears and shear blade with GARDENA Cleaning
Spray
Art. 2366 (see 6. Maintenance).
3. Slide blade protection onto the shear blade.
4. Store Shears in a cool, dry place where they are protected from
frost.
15
GB
