12
GB
Fitting / Removing the
Telescopic Swivel Handle :
Charging the Accu :
1
Fitting / Removing
the Wheels :
3. Assembly
The wheels are only included with the lawn edging shears.
(These can be ordered subsequently via GARDENA Service).
Fitting the Wheels :
v
Push the wheels
A
into the Accu Shears from below until both
catches
B
click into place.
Removing the Wheels :
v
Press both wheels
A
together on the underside of the Accu
Shears and remove.
The
GARDENA Telescopic Swivel Handle Art. No. 8806
(availa-
ble as an accessory) can be mounted in 45° steps from 90° to -90°.
Fitting the Telescopic Swivel Handle :
v
Guide the swivel handle
1
at the desired angle into the handle
holder of the Accu Shears until the lock engages.
Teleskopdrehstiel demontieren :
v
Press the release button
2
and pull out the swivel handle.
The starting lockout and ON button on the Accu Shears no lon-
ger function when the swivel handle is mounted.
4. Initial Operation
The Accus must be charged for 20 hours before using the Accu
Shears.
The accus discharge themselves when stored for a longer period
of time. Therefore, the Shears should be recharged in a dry place
before each operation.
Over-voltage damages accus.
A
V
Ensure the mains voltage is correct.
1. Insert charging cable
3
into charging socket
4
of the Edging
Accu Shears.
2. Plug charging unit into a mains socket.Accu Shears.
The charging indicator lamp
5
comes on.
3. Unplug the Accu Shears from the mains after 20 hours.
When the cutting power drops, recharge your shears immedia-
tely to prevent the cells from becoming completely empty.
5. Operating Your Edging Accu Shears
There is a risk of injury if the switching devices installed on
the Shears are removed or bridged (e.g. by fastening the on
switch to the handle). This prevents the Accu Shears swit-
ching off automatically.
V
Never remove or bridge the switching devices.
The starting lockout prevents your GARDENA Edging Accu Shears
from being switched on unintentionally.
A
WARNING !
Risk of Injury !
2
4
3
5
B