Risk of injury !
Pulling the filament
out of the filament cassette :
14
GB
Risk of injury !
A
V
Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
•
Filament Cassette for Turbotrimmer classicCut :
Art. No. 5365-20
(one filament)
•
Filament Cassette for Turbotrimmer classicCut plus :
Art. No. 5366-20
(two filaments)
1. Unplug the mains plug.
2. Turn over the Turbotrimmer and rest it on the rubber buffer
of the handle.
3. Release the cassette cover
J
by pressing both locking
0clips
K
and remove the cover.
4. Remove the filament cassette
G
.
5. Remove any dirt.
6. Pull approximately 5 cm of the filaments
3
(one filament for
the classicCut) out of the new filament cassette
G
through
the hole in the plastic ring
N
.
7. Insert the filament cassette
G
in the filament cassette holder
L
so that the filaments
3
are inside the metal cases
M
.
8. Fit the cassette cover
J
on the filament cassette holder
L
so
that you hear both locking clips
K
click into place.
When replacing the cover, ensure that the filaments are inside
the metal cases and are not trapped.
v
If the cassette cover
J
cannot be touched down, turn the
filament cassette
G
to and fro, until the filament cassette
G
is completely in the filament cassette holder
L
.
6. Trouble-Shooting
Risk of injury from the cutting filament !
V
Always unplug the mains plug of the Turbotrimmer be-
fore troubleshooting.
If a filament is drawn into the filament cassette you can pull it out
again as described below.
1. Unplug the mains plug.
2. Remove the filament cassette as described under 5. Mainte-
nance
“Replacing the filament cassette”.
3. Press together the plastic ring
N
on the filament cassette
G
between your thumb and forefinger.
4. Draw the plastic ring
N
with the thumb of the other hand over
the side part of the filament cassette
G
(use a screwdriver if
necessary).
You can now access the filament that was drawn into the
filament cassette.
Replacing the filament
cassette :
J
G
3
L
M
K
K
M
N
3
N
G
