background image

7

6

9

0

2

A

Connecting the Turbotrimmer :

Setting the Turbotrimmer 
to the working position :

8

7

A

C

B

D

E

12

GB

Risk of injury ! 

3. Assembly  

1. Turn over the Turbotrimmer and 

stand it on the rubber buffer of 
the handle.

2. Fit the cover 

1

on the cutting 

head 

2

and guide the cutting 

filament 

3

through the opening 

in the cover.

3. Secure the cover 

1

using the 

two screws 

4

.

4. Push the plant guard 

5

onto 

the cutting head 

2

until you 

hear it snap into place.

The plant guard keeps plants you 
do not want to trim away from the 
cutting filament.

4. Operation 

Risk of injury if the Turbotrimmer does not switch off when
you release the start button.

V

Never bypass the safety devices (by binding the start 
button to the handle, for example).

1. Push the extension cable 

6

into 

the cable lock 

7

on the handle 

8

.

2. Plug the plug 

9

of the Turbo-

trimmer into the socket 

0

of the 

extension cable.

Working position :

Position the additional handle 

A

so that the cutting head 

2

is

tilted slightly forward when you hold the Turbotrimmer in the 
working position.

1. Unscrew the tightening nut 

B

move the additional handle 

A

to the correct position and tighten 
the nut 

B

by hand.

Only for classicCut plus :

2. Unscrew the adjusting nut 

C

set the additional handle 

A

to 

the correct angle and tighten 
the adjusting nut 

C

by hand.

3. Unscrew the tightening nut 

D

adjust the handle 

E

to the 

correct length and tighten the 
nut 

D

by hand.

Mounting the cover 
and plant guard :

5

2

3

4

1

Summary of Contents for 2402









Reviews: