Manual operation by
Water Control:
2
4
The valve can be opened or closed manually at any time (Only during
the pairing process is no manual irrigation possible). A program
controlled open valve can also be closed early without changing the
program data.
1. Press Man.button to open the valve manually (or to close an
open valve).
The LED Active Watering
(2)
is lighting green for 10 sec.
2. Press Man.button to close the valve early.
If the Water Control is in “Sleep Mode”, press the Man.button
2 times.
The watering duration (0 to 59 min.) is according to the parameter
of the GARDENA smart App.
If a programcontrolled watering has been stopped manually,
this programcontrolled watering cannot start again.
If the valve has been opened manually and a programmed start
of a watering period overlaps the manual opening period, the pro
grammed starting time is suppressed.
Example:
The valve is opened at 9.00 a.m. manually, the opening period is
30 minutes. A program with a start time (START) between 9.00 and
9.30 a.m. will not be undertaken in this case.
5. MAINTENANCE
To clean the filter:
8
e
9
The filter
(13)
should be checked regularly and cleaned when
necessary.
1. Unscrew sleeve nut
(9)
of the Water Control by hand from the
tap thread (do not use pliers).
2. If necessary unscrew the adaptor
(8)
.
3. Remove filter
(13)
from sleeve nut
(9)
and clean.
4. Fit the Water Control again (see 3. INITIAL OPERATION
“To connect the Water Control” ).
To clean Water Control:
No caustic / abrasive cleaning agents should be used.
v
Clean Water Control with a damp cloth (do not use solvent).
6. STORAGE
To put into storage:
The unit must be stowed away from children.
1. To preserve the batteries, these should be removed
(see 3. INITIAL OPERATION).
2. Stow the Water Control in a dry area where it has protection from
frost.
14
GB
