6
Adaptor for G 3 /4 thread (26.5 mm)
The adaptor supplied allows the Water Timer to be connected to taps with
a G 3 /4 thread (26.5 mm). If you are using the adaptor, screw
the adaptor
onto the tap
before screwing the Water Timer onto the adaptor.
Warning ! Attach and screw on manually. Do not use pliers !
6.3 Function Keys and Display
(Fig. C)
Note :
The Water Timer control unit
1
can be removed (Fig. B). This allows
you to set the watering program somewhere other than where the Water
Timer is to be used.
Menu-O.K.
➔
Changes to the next stage of the program. Simultaneously accepts
and confirms the data you have entered using the
man.
key.
On / Off-man.
➔
Used to change the individual data (e.g. counting hours, minutes, ...)
➔
To switch a connected watering system on and off manually.
LCD Display
Note :
.
In the entry mode the corresponding display flashes.
.
At high temperatures (over 60 °C at the display) the LCD may extinguish.
This has no effect on the program sequence. Once the LCD display
cools down, the display will appear again.
On
Status display – The connected watering system is active.
Off
Status display – The connected watering system is inactive.
Time
(current time)
➔
In the programming mode :
Hours – Hours of the current time
Minutes – Minutes of the current time
Start
➔
Starting time; when the watering system becomes active.
Hours – Hour when devices become active
Minutes – Minutes when devices become active
Cycle
Displays selected program.
Summary of Contents for 1820
Page 3: ......
