A pump which is damaged should not be used. In the
event of damage, have the pump checked by GARDENA
Service.
Damaged connecting cables to the pump can only be
replaced by the GARDENA Service.
Disconnect the watering control from the outlet socket
for all work on the balcony watering.
The pump may only be operated with 14-V protected
low-voltage in combination with the GARDENA watering
control for pump.
Protect from rain. Use the watering control for pump only
in a rain-protected area.
Personal safety
DANGER! Risk of suffocation!
Small parts can be easily swallowed. There is also
a risk that the polybag can suffocate toddlers. Keep
toddlers away when you assemble the product.
Only use Original GARDENA parts, as the function of the
system cannot otherwise be guaranteed.
Do not let the pump run dry.
Observe the minimum water level in accordance with the
Technical Data given for the pump.
Do not use the product while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while you operate the product may result in
serious personal injury.
Do not open the pump further than delivery status
(only exception: the foot).
3. INSTALLATION
DANGER! Risk of injury!
Injury when the product starts accidentally.
v
Disconnect the product from the mains before
you install the product.
To calculate the water quantity and container size:
The Flower box watering set allows up to 25 plants
(when using one drip head per plant) to be irrigated to
a maximum length of 10 m.
With the accessories from the GARDENA Micro-Drip
System (supply pipe, pipe pegs and drip heads), a max. of
40 drip heads may be connected to the pump. The supply
pipes must be distributed to all 3 connections of the pump.
Example calculation:
– You have 8 plants (e.g. in 2 flower boxes) and each
plant should be watered with a drip head.
– Each plant should be irrigated once a day with
0.1 litres.
– The amount of water should last for 10 days.
8 (drip heads) x 0.1 litres x 10 (days) = 8 litres
v
You need a container with a capacity of more than 8 litres
(as some water evaporates from the container in 10 days).
The corresponding watering program can be taken from
the program table (see 4. OPERATION).
CAUTION!
If the required container exceeds 100 litres,
you must observe the max. weight load of your
balcony (according to DIN 1055).
To connect the supply pipes to the pump
[ Fig. I1 / I2 ]:
The pump has 3 connections
(10)
for supply pipes
(3)
.
1. Slide the sleeve
(6)
onto the supply pipe
(3)
.
2. Slide the supply pipe
(3)
onto one of the three connec-
tions
(10)
.
3. Screw the sleeve
(6)
onto the connection
(10)
.
Screw the end caps
(7)
onto the unused connections
(10)
.
2. SCOPE OF DELIVERY
[ Fig. D1 ]:
Art. 1407 / 13158:
(1)
1 x Watering control for pump with 14 fixed watering
programs
(2)
1 x Submersible pump (operating voltage 14 V)
(5)
1 x Inline Drip Heads, 2 l/h
Art. 1407:
(3)
10 m Supply Pipe ∅ 4.6 mm (3/16")
(4)
15 x Pipe Pegs ∅ 4.6 mm (3/16")
(5)
24 x Inline Drip Heads, each 2 l/h
(6)
3 x Sleeves
(7)
2 x End Caps (for water pump)
(8)
1 x Cleaning Needle
(9)
3 x End Caps (for Supply Pipe)
EN
11
