8) Use a Black Knob (LL) to attach a
Canopy Side Bar (J) to each end of
the top frame bar. The fluted circles
on the canopy bars should face the
fluted circles on the top frame bar.
See Fig. 8.
9) Place one end of the Canopy (K) over one
of the canopy side bars, fitting the corner
pockets over the ends of the canopy side
bar. Remove the black knob and reinsert
it through the grommet hole in the canopy.
Secure the canopy to the bar with the
hook-and-loop straps. Stretch the Canopy
(K) over the top of the swing and repeat
procedure on other Canopy Side Bar (J).
You can change the tilt of the
canopy by adjusting the black knobs.
See Fig. 9.
10) Now go back and securely tighten all nuts
and bolts using hex and Allen wrenches.
Place Nut Caps (PP, QQ) over all nuts,
and place Bolt Caps (NN, OO) over all bolts.
Fig. 8
Fig. 9
black knob
2
CANOPY ASSEMBLY
Description
Part
Quantity
Picture
Hardware Used
x
LL
J
LL
J
K
