8
TOLL FREE HELP LINE 1 855 691 5969
MODEL Y4007
MINI CULTIVATOR AND DETHATH
UNPACKING & ASSEMBLY
Unpack your unit by carefully li ing it out of its container. Remove any packing material and cut any plas c
es holding the handlebar pieces to the rest of the assembly
ASSEMBLY
1.
Stand the mini cul vator assembly upright
with nes and wheels on a level surface.
Wheels should be set in the lowest posi on.
DO NOT
place the mini cul vator on a high
surface where it can fall and cause property
damage or personal injury
2.
Using two tee handle nuts, two bolts and two
curved washers, assemble the middle
handlebar to the lower handlebar that is
already a ached to the mini cul vator
assembly.
(SEE FIGURE 1)
The middle
handlebar can be installed in two posi ons
one high and one low.
DO NOT OVER
TIGHTEN THE TEE HANDLE NUTS
3.
A ach the upper right and le handlebars to
the middle handlebar using the two
remaining tee handle nuts, bolts, and curved
washers.
(SEE FIGURE 1) DO NOT OVER
TIGHTEN THE TEE HANDLE NUTS
WASHER
Y4000.02.01
BOLT
，
HANDLE CLAMP
FIGURE 1
ER
Y4000.02-03A
Y4000.07
BOLT
，
HANDLE CLAMP
WASHER
Y4000.02.01
Y4000.02-04A
Y4000.02-02A
