- -
11
When the engine starts
IMPORTANT
For maximum vacuum performance and operating life, allow the
engine to warm before use.
1.
Run the engine at idle speed until operating temperature is
reached(2 to 3 minutes)
2.
As the engine warms, open the choke gradually by slowly
pushing the choke control in to the fully retracted position.
3.
The machine should now be ready for use.
If the engine dose not start
Repeat the appropriate starting procedures for “hot” or “cold”
engine. If the engine still will not start, follow the “Starting a
Flooded Engine” procedure (below).
Fuel primer bulb
Fuel discharge line
