Thomas 2pc Pack Ottoman Assembly Instruction
JDC-6525A-8
Step 1: Line up bolt holes on leg (A) with corresponding
bolt holes on the ottoman seat (B). Screw the M6*18 bolt
(D) with washer (E) with Allen wrench (F). Do not
completely tighten bolts. See Figure 1 above. Repeat this
step until all two legs (A) are attached to the seat(B).
Step 2: Make sure all bolts (D) are completely tighten. Place
bolt cover (C) on the head of all bolts (D).
Part List
Description Qty
LEG
OTTOMAN SEAT
BOLT COVER
M6*18 BOLT
WASHER
ALLEN WRENCH
A
B
C
D
E
F
See our extensive assortment of outdoor living products on-line at
www.sears.com and www. kmart.com.
