①
: Place the left side panel (H) and the right
side panel (I) on a non-abrasive surface and
line up the holes. For each hole from left insert
a long bolt (Nc) through a small metal
washer (Ne), side panel rims, through another
small metal washer (Ne) and secure with a
nut (Nf). See Fig. 9 and Fig. 10. Don’t tighten
completely.
②
: Assembled 2 table tops (J) together. Line
up the hole, from left insert a short bolt (Na)
through a small metal washer (Ne), the table
top rims, another small metal washer (Ne) and
secure with a nut (Nf). See Fig. 11. Don’t
tighten completely.
③
: Attach the support bar (K) to the table
tops (J). Line up the hole, from left insert a
medium bolt (Nb) through a small metal
washer (Ne), the support bar (K), a plastic
washer (Nk), table top rims, another small metal
washer (Ne) and secure with a nut (Nf). See
Fig. 12. Don’t tighten completely.
④
: Attach the support bar (K) to the assembled
side panels. Insert a short bolt (Na) through
a small metal washer (Ne), through the bracket
of the support bar (K) and secure into the rim of
the left side panel (H). See Fig. 13. Don’t tighten
completely.
⑤
: Unfold the left side panel (H), and line up the
holes. For each hole, from inside insert a short
bolt (Na) through a small metal washer (Ne),
table top rim and secure into the side panel (H).
See Fig. 14 and Fig. 15. Repeat procedure for
the right side panel (I). Tighten all bolts and nuts
and cover with bolt caps (Np) and nut caps (Nq).
Na
Nq
Nf
Ne
Ne
Np
K
Na
Np
Ne
H
J
J
I
H
H
I
Nc
Np
Ne Ne Nf
Nq
Nc
Np
Ne Ne Nf Nq
Nq
Nb Ne
K
J
J
Ne Nf
Nk
Np
6
J
H
Na
Np
Ne
Np
Na
Ne
J
J
I
H
J
Na
Ne
Np
H
7
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 15
Fig. 14
