9
Blades
Caution! Disconnect the mains and wear protective gloves before handling the
blades
•
Worn blades can impair performance and overload the motor. Before each use,
check the condition of the blades and if necessary have them sharpened at your
local hardware store.
•
The blades are designed to be reversible. To change the direction of the blades
proceed as follows:
1. Undo the 2 bolts (1) from the underside of the housing by using the
supplied hex key supplied (as shown in fig 9.)
2. Take the scarifier cylinder out of the housing.
3. Loosen from the other side the hex nuts (2) and take the cap (3) flange (4),
blade (5) and distance rings (6) off the axle (7) in order.
4. Change the direction of the blades, or use a new one and insert into the
axle in order.
5. Tighten the nut and assemble the cylinder to the appliance.
Figure 9 Figure 10
Collection and Aeration
With the rake cylinder, the appliance can be used as a lawn rake for removing matted
grass and moss from your lawn. It is recommended that you use the rake attachment
every 4-6 weeks, depending on the condition of your lawn.
