background image

 

 

8.

 

Place the netting clips along the sides of the frame to secure the 
netting. Press down on the tab in the back of the clips to lock them into 
place. 

9.

 

Press the ground pegs into the ground as far as possible (around 12-14 

inches) to make sure it’s secure.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for G4460

Page 1: ...strong winds Parts list 4 x arches 8 x staked supports 14 x cross supports 15 x metal inserts 28 x sure clips 16 x net clips 1 x netting Assembly Note Assembly is easiest with two people 1 Ensure that you have all parts listed and lay them out on a flat clean surface 2 Attach the 2 cross supports together using the metal inserts Repeat until you have 7 assembled cross supports 3 Stand the arches u...

Page 2: ...owards the inside of the pea tunnel 5 Carefully rotate the frame onto its side and connect each arch with the staked supports using the metal inserts Carefully rotate the frame back upright 6 Attach the 4 remaining cross supports to the newly attached staked supports 7 Carefully unfold the netting and spread it over the frame Loop the netting into the hooks on the ends of the cross supports ...

Page 3: ...s along the sides of the frame to secure the netting Press down on the tab in the back of the clips to lock them into place 9 Press the ground pegs into the ground as far as possible around 12 14 inches to make sure it s secure ...

Page 4: ...does not affect your statutory rights If your product fails due to a defect in material or workmanship during this period please return it to the place of purchase Normal wear and tear is not covered under the guarantee Any guarantee is invalid if the product has been misused or subject to neglect or an attempted repair other than by our own service centre Due to continuous product improvement we ...

Reviews: