10
Adjusting the angle of the cutting head
Press the button on the main motor as shown below, this will enable you to
adjust the angle of the cut to suit the height of the grass. When the button is
released the head will remain in place.
Adjusting the rotating head
The trimmer can also be used as an edging tool. To adjust the angle, pull the
head grip away from the rotation lock, downwards, then turn the head 90°
and release, it will then lock into place.
Care and maintenance
•
Before each use check the trimmer for any obvious defects such as
loose worn or damaged parts.
•
Do not use the trimmer if there is any sign of damage or if cutting
edges are blunt this will over stress the motor of the machine.
•
Check the outer sections of the body and safety switch for any
damage and if present get a qualified person to replace.
•
Carry out the following maintenance and cleaning work regularly
•
Every time you use the trimmer clean all parts especially the ventilation
slots and under the safety guard. Remove any moisture, debris or dust
and store in a clean dry environment.
•
Do not use or submerge the trimmer in water or use cleaning agents or
solvents, these may damage the materials present on the trimmer.
•
Do not try to service the trimmer yourself, always take it to a qualified
repair person.
