8
Assembly
1.
Connect the safety guard to the motor head by pushing in the
direction shown below until you hear it click into place.
2.
Connect the edge guide into its correct position on both sides of the
cutting head motor.
Fitting a new blade
To fit a blade, locate the large hole over the lug on the blade head. Pull it in
the direction shown until it snaps into place in the smaller hole.
Charging the battery
Plug the charger into a socket; push the battery into position (you will hear a
click when it is located correctly). The charger has 3 LED lights and an on
button. Turn the power on and press the on button; if the LED lights all turn
green the battery is fully charged. If the LED lights are red, the battery requires
charging.
