Newland
steel picnic bench
3
Step 5
Step 6
In preparation for attaching the cross brace (as
shown in figure 8) place a bolt and washer through
each of the two holes in the leg-frame uprights....
...and then offer up the the cross brace and loosely
secure using a washer and a locknut for each of the
two holes
Step 7
Step 8
Now attach the other end of the cross brace to the
underside of the table top using one of the 50mm
coach screws, ensuring that the hole is centrally
aligned across the middle slat of the table top.
Now tighten all of the nuts and bolts...