No. Appellation
Qty
1
Lid
1
2
lid handle
1
3
thermometer
1
4
warming rack
1
5
Interchangeable cast iron grid (450 x 395mm)
1
6
heat distribution panel
7
7
firebox assembly
1
8
main burner tube assembly
4
9
right side table
1
10 Side burner layer
1
11 reinforce bar
4
12 control panel assembly
1
13 Battery box
1
14 control knob
5
15 grease tray
1
16 grease cup assembly
1
17 cart front beam
1
18 door magnet
1
19 Leg-B
2
20 Leg-A
2
No. Appellation
Qty
21 side low panel
2
22 rear side low panel
1
23 bottom panel assembly
1
24 swivel caster
4
25 door assembly
2
26 side burner nozzle base
1
27 side burner cover
1
28 side burner cooking grid
1
29 side burner assembly
1
30 side burner insert tray
1
31 Cart attachment bracket
4
32 gas-jar bracket
2
33 Bottle opener bracing sheet
1
34 Bottle opener
1
35 Cast iron grid (450 x 295mm)
1
36 Support rack
1
37 Interchangeable round grid (Ø 305mm)
1
38 Interchangeable round plate (Ø 305mm)
1
39 Pizza stone (Ø 305mm)
1
Make sure your grill is assembled properly. Detailed assembly instructions are packed with each grill giving specific assembly
procedures for each model. Follow these instructions carefully to ensure the correct and safe assembly of the grill.
Caution:
Although we take every effort to ensure that the assembly process is as easy as possible, it is inherent with fabricated
steel parts that corners and edged can cause cuts if improperly handled during assembly procedures. Be careful while handling
any parts during assembly. It is strongly recommended that you protect hands with a pair of work gloves.
EN
Technical data
Made for:
Garbou GmbH
Dornaper Strasse 18
42327 Wuppertal
Germany
Distributor:
BAHAG AG
Gutenbergstr. 21
68167 Mannheim
Germany
EN
The gas cylinder is recommend to 5kg LPG gas bottle, it is sufficient for a heating period of approx. 3.5 hours with full power.
Only to be used with a gas cylinder that does not exceed 500 mm in height and >240 mm <310 mm in diameter.
Whilst operating the gas grill with a 11 kg gas cylinder, it's required to store the gas cylinder outside of the gas grill cabinet. The
gas cylinder must always be kept in upright position on a flat surface and must be protected of tipping over.
Strong wind is not allowed to blow through the back of the gas grill.
Garbou GmbH, Dornaper Strasse 18, 42327 Wuppertal, Germany
0359-17
Product name
Outdoor gas Grill
Model Number
Cliff 450
Product Identification Number
0359CR01503
Gas Category
I3+(28-30/37)
I3B/P(30)
I3B/P(37)
I3B/P(50)
Gas and Supply Pressure
Butane (G30)
Propane (G31)
Butane/Propane
28-30 mbar
37 mbar
30 mbar
37 mbar
50 mbar
Country of Destination
I3+(28-30/37): BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI
I3B/P(30): BE, CY, DK, EE, FI, HU, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, LU, MT
I3B/P(50): AT, CH, DE, SK
I3B/P(37): PL
Main Burner Injector Size
Ø 0.9 mm
Ø 0.9 mm
Ø 0.9 mm
Ø 0.86 mm
Ø 0.81 mm
Side Burner Injector Size
Ø 0.88 mm
Ø 0.88 mm
Ø 0.88 mm
Ø 0.79 mm
Ø 0.75 mm
Total Nominal Heat Inputs (Hs)
Main burner: 14 kW / 1020 (g/h)
Side Burner Heat Inputs (Hs)
Side burner: 3 kW (218 g/h)
electric energy (V / DC)
4 x 1.5 V LED lamp
Serial Number
Use Outdoors Only
Read the instructions before using the appliance.
Warning : Accessible parts may be very hot. Keep young children away. Made in China
Summary of Contents for 0359CR01503
