8 Ascending Stairs
27
ROCK SUPER-TRAC ONTO LANDING
Stop the Super-Trac when the STOP MARK
is aligned with the top stair nose. Then gently
pull back on the operating handles to lower it
onto the landing. This maneuver is always
done manually.
WARNING
Do not drive Super-Trac past
the STOP MARK. This could
result in a sudden tilting back
and shift of weight to the
operating handles.
Once the tracks are level resting on the
landing, press the drive thumb buttons and
continue to drive backwards until the Super-
Trac is at least 1 foot (0.3 m) from the edge of
the stairs. If the landing is wide enough, move
further away from the stairs for increased
safety.
WARNING
Ensure that the Super-Trac is far
enough back from the edge of
the stairs that the YELLOW LINE
on the drive frame does not
protrude over the edge of the
stairs. This is to ensure that the
front castor wheel lands on the
floor when the platform is tilted
back to the horizontal position.
