5. Raise the Wheelchair Support Handle
and position the Holding Clamp Blocks
under the curve in the wheelchair
handle. Ensure that the wheelchair
handle rests in the hollow of the
Clamp Block.
Adjust the Clamp Blocks side to side by sliding them on their mounting bars.
Adjust their height by pulling out the
Clamp Height Adjusting Pins and
raising or lowering the entire clamp
assembly.
Note
Page 13
Item 2
6. Close the Holding Clamps over the
wheelchair handle, ensuring the
Retaining Pin is on the outside of the
Holding Clamp.
To ensure side-to-side stability, verify
that the wheelchair is centered over
the tracks (refer to step 3 above).
7. Fasten the Safety Belt securely, ensuring that it passes
under
the
arms of the
passenger. Adjust the Headrest.
8. Pull the Wheelchair Handle toward you
until you hear a “click” sound as it
latches in its operating position with the
Locking Teeth latched under the
Locking Bar.
-7-
