-6-
2. Tilt the Support Handle backwards
until the Locking Teeth latch under the
Locking Bar
3. To disconnect the Support Handle,
pull the black Release Handle located
just below the controls on the Support
Handle. This lifts the Safety Bar. Then
push the red Sliding Catch forward,
raise the handle upright.
A
TTACHING WHEELCHAIRS
1. Refer to page 26 to determine the types and sizes of wheelchairs that can be
attached to Stair-Trac.
2. Turn on the Key-Operated Switch located at the rear of the Drive Frame.
3. Back the wheelchair over the tracks,
and center it (side to side) over the
tracks.
4. Lift the Clamp Retaining Pins and
open the Holding Clamps.
