GARANT 921401, Instruction Manual

Page: 54 / 532

en
GARANT Workbench with electric height adjustment
Interval Maintenance work Performed by
Before each use Check the mains cable for secure attachment.
Check the contacts between the cable and the
control module.
Check the workbench, electrical cables, con-
nections, battery, manual pushbutton, spindle
lift column and mains plug for external dam-
age.
Trained person
Monthly Check all components and screw fastenings on
the workbench for tightness and operation.
Remove external dust and dirt.
Check for damage and cracks.
Trained person
Every 6 months Perform only external maintenance on the
spindle lift column.
Lubricate the guide slots and glide channels
with a liquid spray containing PFTE. Do not
open the spindle lift column.
Trained person
1✕ annually Check the battery for electrical safety Electrician
If the workbench is
dirty Clean the side panels, metal fronts, drawers
and feet with paint cleaner.
Clean the worktop with a damp cloth.
Trained person
If the manual pushbut-
ton is dirty Disconnect the control module from the power
supply.
Use a dry or slightly moistened cloth to clean it.
Trained person
In the event of dam-
age to the workbench,
components and ac-
cessories Block access to the workbench and prevent its
use.
Have damaged components and accessory
parts replaced immediately.
Electrician
7. Faults
7.1. QUALIFICATIONS OF PERSONNEL
See Qualifications of personnel [
}
44]
7.2. BATTERY: EXCHANGE OF FUSES
 There are a total of six automobile type fuses totalling 40 A mounted on the rear of the battery.
 The top three fuses protect the 12 V output.
 The lower three fuses protect the 12 V input.
 If fuses blow, always replace them immediately with fuses of the same type and rating.
Instruction manual 54